Timing Accessories to Support Your Network Requirements
Explore Our Products
GPS Lightning Arrestor Kit
150-709 and 150-710
- Protect your systems from lightning damage
- Inline lightning arrestors are mounted on a low-impedance ground between the antenna and the point where the cable enters the building
- The lightning arrestors require no additional power or wiring except the ground lead
GPS Inline Amplifier
150-200
- Extended GPS antenna cable length up to 300 ft. (91m)
- Fits in line with the antenna cable
- No external power source required
- Simple installation
GNSS Accessory Splitter
58536B
- GNSS L1 1:4 Active Splitter
- Has high isolation and is waterproof
- Distributes GPS, GLONASS, Galileo and BeiDou/compass frequencies
- Can be conveniently cascaded without adding separate amplifiers and bias tees between splitters
- Delivers precise GNSS signals over a wide temperature range and in harsh environmental conditions
- Eliminates feedback and interaction between any GNSS systems connected to it
PCIe?/PCI Bus Cards
- GPS-enabled options
- PCIe and PCI form factors
- Nanosecond synchronization
- External frequency input
- Onboard battery-backed real-time clock
Explore Our Accessories
Antenna cables and accessories enable versatile solutions. Our inline GNSS amplifiers installed at the antenna are an easy way to extend cable runs from 225 feet to up to 900 feet, depending on cable type. Our lightning arrestors provide valuable electrical shock protection to the downstream equipment. Antenna cable splitters leverage a single antenna and cable for up to four GNSS receivers.
Ordering antenna components is a simple task if you have a rough idea of the total cable length needed between the TimeProvider? 4100 time server and the mounting location of the antenna. Any extra cable can be coiled to the side.
You can order pre-configured kits that include cable, antenna and related mounting acces-sories from us. These kits vary by total cable length and are based on whether a lightning arrestor is required or not. For long cable runs (>225 feet), the components are assembled individually.
Anti-Jamming GPS/Galileo/GLONASS/ BeiDou Antenna
093-15202-010
This wide-band antenna is a precise, high-gain GNSS antenna that covers the BeiDouB1, Galileo E1, GPS L1, GLONASS L1 and SBAS (WAAS, EGNOS, QZSS and MSAS) frequency bands in the range of 1557 MHz to 1606 MHz.
Single-Band GPS/Galileo/GLONASS Antenna
093-15202-001
This standard antenna used with the TimeProvider? 4100 time server is a high-gain (40 dB) GNSS antenna that covers the GPS L1, Galileo E1, GLONASS L1 and SBAS (WAAS, EGNOS, QZSS and MSAS) frequency bands in the range of 1575 MHz to 1606 MHz.
Single-Band GPS/Galileo/GLONASS Antenna?with BeiDou Support
093-15202-006
This wide-band antenna is a precision, high-gain GNSS an-tenna covering the BeiDou B1, Galileo E1, GPS L1, GLONASS L1 and SBAS (WAAS, EGNOS, QZSS and MSAS) frequency bands in the range of 1557 MHz to 1606 MHz.
Multi-Band GNSS Antenna?
093-15041-001
This multi-band antenna (Part number 112-00163-000) is an Accutenna? technology antenna. It provides triple-band GPS/QZSS-L1/L2/L5, GLONASS-G1/G2/G3, Galileo-E1/E5a/E5b, BeiDou-B1/B2/B2a and NavIC-L5, including the Satellite-Based Augmentation System (SBAS), frequency bands, which are available in the region of opera-tion—WAAS (North America), EGNOS (Europe), MSAS (Japan) or GAGAN (India). It also provides L-band correction services coverage and is especially designed for precision triple-frequency positioning.
GNSS RF-over-Fiber Extension Kit
093-15203-001
The GNSS RF-over-fiber kit is composed of an RF-to-fiber transmitter, a fiber-to-RF receiver, two external power supplies and four adapter cables. The fiber cable provided is a 3-meter-long cable that can be used for bench testing if needed.
GNSS Inline Amplifier With Adapter
093-15202-005
Cable length is a common cause for signal loss between the GNSS antenna and the GNSS receiver. As with any electromag-netic radio wave, GNSS signals become attenuated as they pass through an electrical cable. The amount of signal loss depends on the length and type of cable used. The inline amplifier attaches between the antenna and the antenna cable and uses the same power as the antenna, so does not require extra wiring.
GNSS Lightning Arrestor With 25 ft. Cable
093-15202-002
Lightning strikes pose a significant threat to communication infrastructure worldwide by frequently damaging GPS antennas and receivers. Such damage often occurs not from direct strikes but from the high voltages induced when lightning hits nearby structures. To mitigate this risk, GPS antennas should be placed 15 meters away from lightning rods, towers or any structures that attract lightning.?
Multi-Band GNSS 1:4 Splitter With Two 3-Foot Cables?
093-15202-011
This multi-band, 1:4 active splitter makes it possible to use a single GNSS referencing antenna/cable arrangement for multiple synchronization systems.
Need Help?
Request a Quote
Contact our Client Success Team to get more information about our clock and timing products or to request a quote.
Find Local Sales and Support
We have an extensive network of highly trained clock and timing experts. Go to our listing to locate a sales and support representative in your country.??
Access Our Support Portal
Visit our Frequency and Time Systems support portal to download technical documents and other resources, enter support tickets or open RMA service requests.